HOW SIMPLE TIPS ON CAR MACHINE

The machine is the heart of the car to watch for its health. Thorough maintenance periodically should be done to ensure that the engine condition remains excellent. But doing care in detail and thoroughly takes time, and also cost. So maybe not all of us can do it every time.

For that reason, then there are some tips for car engine maintenance simply. This treatment is only for parts that can be considered important and should not be ignored. These tips can be applied to a new car engine, or a car engine that has been long enough.

Oil Change Periodically

To ensure the car engine is always in excellent condition, then make sure the car oil you use is always in good condition. Therefore, change your car engine oil regularly according to the standard rules of each car. Typically, each car has a rule on the time of oil change, the type of oil to the mileage of engine oil usage is generally the use between 3000km to 5000km.

Oil basically has a function to withstand friction that occurs when the car engine is working. therefore, it is important to pay attention to the condition and type of oil you use, in order to avoid excessive friction when the machine is working. Otherwise, car engines are particularly vulnerable to excessive heat, resulting in engine damage

Check Radiator Conditions

Radiators are an important part of the car that serves to neutralize the heat emerging from the car engine. If the water of the radiator, or the coolant is not working properly, then the machine will quickly buckle and cause fatal damage. It is also dangerous for the motorist itself. Therefore, always note whether the condition of your car radiator in good condition, whether water radiator or coolant in good condition and so on. If you feel the water radiator always decreases, be aware also leakage on the radiator.

Ensure Condition of Carburizing Filter

If you feel your car is often difficult to turn on, try checking on the filter filter of carburizing filters. It is possible that the carburizing filter is dirty and needs to be cleaned. How to clean it is also not difficult, just use a used toothbrush slowly to remove dirt and crust that attaches to the filter. Avoid blowing the filter with a compressor or hairdryer on the carburization filter as it is at risk of damage.

Discard Machine Crust

On the inside of the car engine, especially the long-used, often there is a crust. Therefore, try to remove the crust so it will not stick too long until it is difficult to remove. The way is quite easy, step on your gas pedal deeper so that the engine crust is falling out and out through the exhaust hole. But if you do it on the road, make sure your driving conditions are in a safe position and not dangerous. If not, you can do it in the garage only.

Fill Full Tank of Gasoline

Not a few people who apparently never fill the fuel tank to the full. This habit can actually make the top of the tank that has never been exposed to fluid to be filled with crust and dirt. Therefore, occasionally fill your fuel tank to the full so that the top of the tank remains clean. The crust on the gas tank can be dangerous as it will carry over to the combustion channel.